Question

Download Solution PDF

The simultaneous compaction and shaping of a ceramic powder (and binder) by pressure applied uniformly in all directions is known as

This question was previously asked in
ESE Mechanical 2021 Official Paper
Download PDF Attempt in App
View all UPSC IES Papers >
  1. Glaze pressing
  2. Porcelain pressing
  3. Slip pressing
  4. Isostatic pressing

Answer (Detailed Solution Below)

Option 4 : Isostatic pressing
Free Tests
View all Free tests >
Free
ST 1: UPSC ESE (IES) Civil - Building Materials
20 Qs. 40 Marks 24 Mins
Start Now

Detailed Solution

Download Solution PDF

Explanation:

Isostatic pressing:

In isostatic pressing, pressure is applied from all the directions against the powder that are contained in a flexible mould. Hydraulic pressure is used to achieve compaction. Compaction and shaping are completed simultaneously.

Download Solution PDF
Latest UPSC IES Updates

Last updated on May 28, 2025

->  UPSC ESE admit card 2025 for the prelims exam has been released. 

-> The UPSC IES Prelims 2025 will be held on 8th June 2025.

-> The selection process includes a Prelims and a Mains Examination, followed by a Personality Test/Interview.

-> Candidates should attempt the UPSC IES mock tests to increase their efficiency. The UPSC IES previous year papers can be downloaded here.

Exams Tests Super Practice

More Powder Metallurgy Questions

Q1.Which of the following components can be made by powder metallurgy technique? 1. Porous bearing 2. Filters 3. Gears 4. Turbine blades
Q2.Which of the following processes includes heating of green compact at high temperature in the powder metallurgy process?
Q3._______ is the process of heating the green compact to a temperature below the sintering temperature.
Q4.Cemented carbides tools are normally manufactured via ________.
Q5.Following is not a characteristic of powder metallurgy:
Q6.______ is used for making thin sheets of creamic, which are used in the electronics industry as a substate material for integrated circuits.
Q7.The simultaneous compaction and shaping of a ceramic powder (and binder) by pressure applied uniformly in all directions is known as
Q8.In powder metallurgy, sintering of the component
Q9.Which one of the following processes is NOT used for producing powders?
Q10.In powder metallurgy, the process ‘atomization’ refers to a method of

More Metal Forming Questions

Q1.________ is a type of rolling process used in metalworking. 
Q2.Which of the following is NOT a type of sawing? 
Q3.In a hot working process, metals are deformed _______. 
Q4.A 'two high rolling mill' consists of two rolls which rotate:
Q5.Which of the following statements is true about hot working process? 
Q6.The process of pushing the heated billet or slug of metal through an die orifice, thus forming an elongated part of a uniform cross-section corresponding to the shape of the die orifice is known as ________
Q7._______ is a metal working process which is an example of forging.
Q8.Load Vs Displacement curve shown in the following figure pertains to 
Q9.The maximum value of reduction in rolling process is Where 'D' is roll diameter and 'α' is the angle of bite
Q10.The frictional shear stress (τ) in metal forming is expressed as where 'm' is the friction shear factor and 'σ̅' is the flow stress
Suggested Test Series
View All >
UPSC ESE (IES) Civil Mock Test Series
116 Total Tests with 1 Free Tests
Start Free Test
UPSC ESE (IES) Prelims Paper 1 Mock Test Series
54 Total Tests with   1 Free Tests
Start Free Test

More Production Engineering (Manufacturing) Questions

Q1.Which of the following processes produces the minimum surface roughness on workpieces?
Q2.What is the designated function of a 'planetary internal grinder machine'?
Q3.Which of the following is a limitation of taper turning by swiveling the compound rest?
Q4.To machine an internal hole in a broaching operation, the broach is gripped by the _____.
Q5.What is the capability of a profilometer instrument?
Q6._____ is a welding defect caused by trapping of gas during the welding process.
Q7.Drill chuck is the major part of drilling machines, which _____.
Q8.What is the full form of ‘CBN’, which is used as an abrasive in grinding processes?
Q9.In Arc Welding process, chipping hammer is used to __________________.
Q10.In Carbon Arc Welding, DCSP stands for _____________________.
Testbook Edu Solutions Pvt. Ltd.
1st & 2nd Floor, Zion Building,
Plot No. 273, Sector 10, Kharghar,
Navi Mumbai - 410210
support@testbook.com
Toll Free:1800 833 0800
Office Hours: 10 AM to 7 PM (all 7 days)
Company
About usCareers We are hiringTeach Online on TestbookPartnersMediaSitemap
Products
Test SeriesTestbook PassOnline CoursesOnline VideosPracticeBlogRefer & EarnBooks
Copyright © 2014-2022 Testbook Edu Solutions Pvt. Ltd.: All rights reserved
User PolicyTermsPrivacy
Hot Links： teen patti 100 bonus real cash teen patti teen patti diya teen patti master plus teen patti master apk